Select from our premium line of certified boring and drilling rigs, custom engineered to meet precise structural and exploration parameters worldwide.
Modern infrastructure demands precision, versatility, and efficiency at scales never before observed. In heavy geological excavation and structural foundation engineering, the procurement of a Single Head Multi Boring Machine represents a critical capital investment. Industrial entities, municipal planners, and global mining conglomerates require systems that transition seamlessly between diverse lithological formations. From soft, water-bearing alluvial deposits to highly resistant, unweathered granitic basements, foundation machinery must exhibit structural resilience under tremendous rotational torque and axial thrust loads.
Our market analysis demonstrates that procurement teams prioritize three primary parameters when evaluating manufacturing companies for ODM boring rigs: modular tooling versatility, high-efficiency hydraulic telemetry, and reputable regional compliance records. As urban centers grow denser, construction spaces shrink, pushing the industry toward compact yet powerful designs. For example, micro-piling and structural anchor installations require smaller physical footprints but high drilling precision to preserve the integrity of nearby structures. SINOVO Group addresses this exact intent profile, engineering heavy machinery that integrates multi-functional capabilities with compact chassis configurations.
In foundation engineering, "Single Head Multi Boring" describes the integration of multi-purpose drilling, boring, and soil-mixing capacities within a single, highly adaptable rotary head system. Traditionally, companies had to deploy separate rigs for slurry-wall excavation, continuous flight auger (CFA) piling, and high-pressure jet grouting. SINOVO Heavy Industry has redesigned this workflow by creating integrated power heads that can swap tooling configurations with minimal downtime.
Enables instant transition between pneumatic air-hammer rock penetration and hydrostatic slurry stabilization, optimizing uptime in complex strata.
Features dynamic hydraulic load sensing that automatically balances rotation speeds against formation resistance, protecting tooling from sheer failure.
Fully integrated CAN-bus network allows real-time telemetry, monitoring depth, vertical inclination, and torque directly from the operator cabin.
This structural versatility directly translates to information gain for procurement specialists. Instead of managing a large, underutilized fleet of single-purpose machinery, civil engineering firms can deploy one versatile unit (such as our SK800 or SK900 series) that performs anchor cable drilling, casing operations, core recovery, and micro-pile installations consecutively. This modular design lowers operational overhead, simplifies maintenance, and cuts logistics costs by up to 40% per project site.
SINOVO Group is a professional supplier of construction machinery equipment and construction solutions. We operate across construction machinery, exploration equipment, import/export product representation, and structural engineering consulting, serving heavy equipment and exploration industries worldwide.
Since the early 1990s, our core members have worked at the forefront of the construction machinery industry. Through more than 20 years of research, innovation, and strategic partnerships, SINOVO has built alliances with top global machinery developers and leading domestic manufacturers, earning recognized accolades in engineering machinery export projects.
In 2008, the company initiated a strategic consolidation, establishing TEG FAR EAST in Singapore to expand operations in Southeast Asia. By 2010, SINOVO invested 120 million RMB in our manufacturing base within the Hebei Xianghe Emerging Industry Demonstration Zone. Spanning 67 mu (approximately 44,600 square meters) and positioned 100 km from Tianjin Port, this facility significantly lowers inland transit times and shipping costs for international buyers.
Today, Beijing Sinovo International & Sinovo Heavy Industry Co. Ltd. are ISO9001:2015 certified manufacturers of drilling and piling rigs. Our production headquarters spans 7,800 square meters, featuring more than 50 pieces of heavy industrial equipment. To keep pace with growing global demand, we continuously optimize our production capacities. SINOVO's current annual manufacturing limits reach 1,000 units of core drilling rigs, 250 units of water well drilling rigs, and 120 units of rotary drilling rigs. Powered by our electronic and hydraulic control engineering divisions, SINOVO machinery maintains a highly competitive position in international markets.
To provide complete technical transparency for engineering and procurement specialists, the following section details the core designs, capabilities, and configurations of our premium drilling systems.
The SK666 Micro Pile Drilling Rig is a versatile engineering drilling machine that combines high efficiency, flexibility, and stability. Specially designed for large-diameter, high-precision drilling operations, it is widely used in micro-pile, photovoltaic hole, anchor bolt, casing, and blasting hole construction. It offers excellent geological adaptability and operational convenience, significantly enhancing construction efficiency and hole quality.
Utilizing high-pressure hydraulic oil as its primary power source, this equipment applies advanced oblique wedge principles to generate splitting forces ranging from hundreds to thousands of tons. This industrial-grade machine splits massive boulders in seconds, separating hard ore from rock formations without explosives. Compact and lightweight, it is essential for quarrying, mining, infrastructure, and urban disaster relief operations.
A self-erecting rig featuring advanced hydraulic load-sensing systems and integrated electronic control technology. Designed for simplicity, compact transport, and reliable operation, its applications include drilling with telescopic friction or interlocking Kelly bars (standard supply) and Continuous Flight Auger (CFA) drilling configurations (optional upgrade).
Engineered for deep foundation support, soil nail walls, and highway slope reinforcement. Ideal for installing anti-floating anchors, thin underground diaphragm walls, and tunnel pipe sheds. Suitable for rock blasting holes, bridge foundations, soil reinforcement, and single/double-tube rotary grouting configurations.
Designed for urban underground construction, subways, highway beds, and dam foundation stabilization. It handles multi-tube vertical and horizontal drilling with diameters ranging from 89mm to 142mm. The machine is also configured for rotary, swing, and fixed spray grouting, and features a 3-ton onboard crane to reduce manual labor requirements.
Built on a modified loader chassis, this system is engineered for shallow, small-diameter foundation projects. It is widely used for utility pole installation and solar photovoltaic pile placements across flat or rolling terrains.
An all-in-one pneumatic and fluid drilling system. It is designed for anti-floating anchors, cable anchoring, slope stabilization, high-pressure jet grouting, tunnel grouting, down-the-hole rock drilling, casing support, micro-piling, and steel pipe piling projects.
Features a high-power top-drive percussion head. This technology enables impact rock drilling without down-the-hole hammers or high-capacity air compressors, producing high torque and rotational speeds. It is ideal for gravel, sand, and collapsing formations where rapid drilling and clean, stable holes are required.
Designed for 50-90mm diameter boreholes in confined environments. Its compact chassis, low operating weight, and high mobility make it suitable for narrow underground mining paths, foundation pits, and urban tunnels where standard equipment cannot operate.
| Parameter | Specification |
|---|---|
| Main Drive Motor Power | 75 kW |
| Maximum Pile Diameter | 1200 mm |
| Maximum Pile Depth | 28 meters |
| Drilling Force | 460 kN |
| Drilling Speed Range | 0.05 to 2.2 m/min |
| Rotational Speed (Fwd/Rev) | 5-96 RPM / 5-90 RPM |
| Total Machine Weight | 25,000 kg |
| Drill Rod Dimension | 180 x 180 x 16 mm |
| Core Pile Section Limit | 500 to 1200 mm |
| Longitudinal Step Travel | 1.8 meters |
| Horizontal Step Travel | 0.6 meters |
| Base Frame Size | 8200 x 2300 mm |
Engineering reliability is verified through strict compliance frameworks. SINOVO Group implements a rigorous quality management system certified under the ISO9001:2015 standard. Additionally, all drilling rigs and custom machinery bear the European Union CE Mark and the Eurasian Custom Union GOST-R certification, verifying their compliance with demanding international safety and operational standards.
Beyond corporate operations, our structural designs are protected by a range of national and international patents. These innovations cover critical subsystems, including high-torque head configurations, hydraulic load-sensing systems, and automated mast alignments. These developments help ensure that our customers receive machinery engineered for reliability under extreme operational stress.
More than three decades of scaling manufacturing and refining global supply logistics.
SINOVO's core technical team began manufacturing and servicing construction machinery, establishing foundation engineering protocols for regional project sites.
Established TEG FAR EAST in Singapore, centralizing sales, engineering consulting, and technical support networks for the Southeast Asian market.
Invested 120 million RMB in our 67-mu Xianghe industrial manufacturing complex, streamlining assembly and lowering export transport costs.
Providing certified boring systems to over 120 countries, supported by regional supply hubs in Singapore, Dubai, and Algiers.
SINOVO's engineering solutions are tested across challenging project sites globally. From high-humidity, marine-piling operations in Southeast Asia to deep rock drilling in the Middle East, our machines are designed to maintain consistent penetration rates and uptime.
To learn more about on-site performance across different geology profiles, view our detailed TR250D Lebanese Infrastructure Project Case Study.
SINOVO Group supports our international customers with a comprehensive after-sales service framework. Every new rig is backed by a one-year structural warranty. During this period, our engineering teams provide free site setup, operator training, and scheduled maintenance services. We also supply essential spare parts at no extra cost, minimizing downtime for your projects.
We provide detailed soil and rock formation analyses, matching site requirements with optimized rig and tooling configurations to help ensure operational suitability.
Every machine undergoes factory testing and load calibration before shipping. Standard delivery times range from 10 to 15 days, with extensions for custom components.
We deploy field engineers for on-site commissioning and operator training. Because we source key components from international manufacturers, replacement parts are easily accessible globally.
Technical insights for engineers, procurement managers, and operations planners.
In geotechnical engineering, it refers to a rotary drilling rig with a versatile power head. This system allows operators to switch between Continuous Flight Auger (CFA) boring, core drilling, anchor installation, and soil-mixing operations by swapping tool heads on the same machine mast.
SINOVO's main manufacturing base in the Xianghe Industrial Park is located 100 kilometers from the Port of Tianjin. This close proximity helps reduce transit times and lower inland transportation costs for heavy equipment exports.
Yes. SINOVO rigs are certified under ISO9001:2015, CE, and GOST-R standards. We can also adapt configurations to meet local environmental, safety, and electrical regulations based on customer requirements.
Our standard one-year warranty covers the replacement of normal wearing parts at no charge. We also send field technicians for on-site commissioning, operator training, and maintenance support to help ensure the equipment is correctly integrated into your operations.
Yes. Our engineering division designs custom configurations for challenging soil conditions, including cobbles, gravel, and collapsing layers. Customizations include modified torque capacities, specialized casing drivers, and top-drive percussion systems.
Explore our heavy excavation support systems, auxiliary crawler cranes, and pile demolition machinery designed for high-load operations.
SINOVO
